Expedition Marquee Tent Hope for persons

Perfect for a group of 8 people with a reserve for extra one. The whole group together! Weighs less than two tents for 4 people, needs space as one tent with vestibules. Cost-effective purchase compared to two tents.

Features:

• number of people: 8 people

• seasonality: 4seasons can be used all year round, in the high mountains in summer and in the Carpathians

• dimensions: area 280 * 280 cm

• number of entrances: 2

• vestibules: two vestibules in front of the entrances to the inner tent, space for staff from a width of 50 cm around the perimeter of the tent.

• specificities of installation: the tent is set on the central collapsible rod. Has 8 stretch marks.

• Weight: 6.3 kg with the rod

Construction:

• The tent has two layers. This design keeps the temperature better and loses less heat on strong winds.

• The inner tent is attached to the outer awning with slings with fastex. If necessary, the outdoor awning can be used separately - convenient for hot or rain bivouacs.

• The outer awning is made of Polyester 180t si Ripstop fabric, with internal polyurethane impregnation and external silicone coating. The fabric is minimally stretched and protects well from moisture.

• The inner part is made of lighter Polyester 90t Ripstop fabric, which provides ventilation and protects against condensation.

• Ventilation: on the outer awning and the inner tent under the top of the tent there are three ventilation windows that close with zipper and Velcro. This provides strength and wind resistance with well-stretched extensions.

• Two entrances on opposite sides. On the outer awning, the entrance is fastened vertically with a YKK zipper. The entrance to the inner part is made as a tube of fabric. The tube is tailored so that the entrance is completely closed without being tied. The lower part of the inlet pipe is reduced to minimally get wet and dirty. The entrance is wide enough to easily enter the down jacket or two people could wear shoes.

• The bottom is completely removable. Bottom material - Oxford 210PU. Convenient for meetings, setting up tents in bad weather and removing debris / moisture from the inside.

• The rod is made of aluminum alloy.

Geometry:

• The tent has a square cross section and a high wall for a more comfortable life. Also, the square cross section of the bottom is more convenient for sleeping places.

• Horizontal section of the roof cone - equilateral octagon. This results in better wind resistance. With this design, the direction of the wind does not matter for the installation of the tent.

The best mechanism for team building

The lightest four-season tent for a big group.